INSTALLING THE
JLD BRIDGE SYSTEM
PART 5: MOUNTING THE JLD BRIDGE SYSTEM
Put the JLD Bridge System in through the soundhole and line up the hole in the top of the mounting block with the mounting hole you drilled in the bridge. A flashlight shined through the mounting hole can make it easier to find the hole in the top of the post.
Insert the mounting screw (B)through the mounting hole and twist it into the threaded hole in the top of the mounting block. Snug the JLD Bridge System against the inside of the top but don't overtighten the screw.
Be sure that the bridge pins (A) have room to clear the top of the mounting post. If not, you can use a drill (make sure that the bit fits easily into the bridge pin holes) to clear away any obstructing mounting post material after the installation is finished.
|
|
|